I've bought an unit scanner with Canon brand. It has the features of scanning negative film.
This scanner can scan 35 mm film strip one frame at a time. Foilow the procedure below when scanning film.
Do not connect other than the accompanying Film Adapter Unit to the FAU connector. Use of other units may lead to malfunctions of the connected unit and the scanner.
Do not touch the metallic parts of the FAU connector.
Clean the document glass before placing the Film Guide on it, otherwise dirt and dust can affect image quaiity or damage the film.
Attach the cable for the Film Adapter Unit to the FAU connector on the scanner's side panei
insert the cable plug of the Film Adapter Unit all the way into the FAU connector.
Open the document cover and place the Film Guide on the document glass of the scanner. Align the Film Guide's tab with the FAU symbo! on the document glass of the scanner.
3 Remove the cap from the Film Adapter Unit and gently set the Film Adapter Unit over the first frame in the Film Guide.
Align the tab on the Film Adapter Unit with the Film Guide.
You need to calibrate the scanner before scanning film for the first time. Do not place a film strip in the Film Guide at this point as it is not required for calibration.
Gently close the document cover.
5 Start MP Navigator EX.
Follow the step 2 in "Try Scanning" on page 9.
6 Click Film.
7 Click Scan.
8 Click OK on the calibration message window.
Do not move the scanner while it is operating.
9 When the scanning message window appears, open the document cover, remove the Film Adapter Unit, and then attach the cap to the unit.
10 Place the film in the Film Guide.
Place the film face up in the Film Guide (images and words should read correctly from above) with the spaces between frames aligned with the guidelines on the guide.
11 Remove the cap from the Film Adapter Unit and gently set the unit over the frame you wish to scan.
Align the tab on the Film Adapter Unit with the Film Guide.
Do not move the Film Adapter Unit once it has been placed on the Film Guide. Sliding it may scratch the film.
12 Gently close the document cover.
(fj^) The document cover does not touch the document glass. Be careful not to force the document cover down.
1 3 Click OK on the scanning message window. The scanned image is displayed in the preview area.
Do not move the scanner while it is operating.
14 Confirm the scanning image, and then click Scan to start scanning.
Do not move the scanner while it is operating.
15 When prompted that the scanning completed, click Exit.
16 Click Save to save the image and close MP Navigator EX.
- After the scanning is finished, remove the Film Adapter Unit, and then attach the cap to the unit. Remove the film and the Film Guide from the document glass.
- Do not leave the film strip in the Film Guide for an extended period of time as heat from the unit may damage the film.
- For more information on scanning film, see "Scanning Film" in the on-screen manual: Scanning Guide.